Comments on: Wow! The D-Link DIR-600 supports DD-WRT http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm Dreams ∙ Passion ∙ Digital World Sun, 05 Feb 2012 14:21:31 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: rgsx http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14991 rgsx Mon, 23 Nov 2009 15:26:15 +0000 http://www.shadowandy.net/?p=3086#comment-14991 on http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30 try this command to clear everything mtd -r erase nvram then, just configure the basic wireless config on WDS, this is working: (wirelessG) -Wireless Physical Interface wl0 --> hidden ssid and no security - Virtual Interface ---> WPA security 2nd router (tomato) on WDS connects to the 1st router's hidden ssid above on http://www.dd-wrt.com/wiki/index.php/Hard_reset_or_30/30/30

try this command to clear everything
mtd -r erase nvram

then, just configure the basic wireless config

on WDS, this is working: (wirelessG)
-Wireless Physical Interface wl0
–> hidden ssid and no security

- Virtual Interface
—> WPA security

2nd router (tomato) on WDS connects to the 1st router’s hidden ssid above

]]> By: kampungwifi http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14987 kampungwifi Mon, 23 Nov 2009 03:40:17 +0000 http://www.shadowandy.net/?p=3086#comment-14987 Ya, the signal is there. But cant connect. i has reset the router for a 8 times. but till now, i cannot connect wirelessly. Ya, the signal is there. But cant connect.
i has reset the router for a 8 times.
but till now, i cannot connect wirelessly.

]]> By: rgsx http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14985 rgsx Sun, 22 Nov 2009 15:18:09 +0000 http://www.shadowandy.net/?p=3086#comment-14985 here's the temp solution and working for 1 day already without reboot 1) reset router 2) enter new admin profile and password 3) goto Wireless, use only AP, do not add any virtual device 4) goto wireless security, use WPA and AES 5) enable uPnP 5) save, go to Admin page, apply, then reboot I don't know which is causing the wifi problem, if add/change the following additional virtual interface administration-web access administration-remote access enable I will loose the wifi in about 30 minutes, the signal is still there but "can't connect" here’s the temp solution and working for 1 day already without reboot
1) reset router
2) enter new admin profile and password
3) goto Wireless, use only AP, do not add any virtual device
4) goto wireless security, use WPA and AES
5) enable uPnP
5) save, go to Admin page, apply, then reboot

I don’t know which is causing the wifi problem, if add/change the following additional virtual interface
administration-web access
administration-remote access enable

I will loose the wifi in about 30 minutes, the signal is still there but “can’t connect”

]]> By: kampungwifi http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14983 kampungwifi Sun, 22 Nov 2009 11:56:19 +0000 http://www.shadowandy.net/?p=3086#comment-14983 hate it because cannot connect to wifi. Only lan port ok. now i'm headache.. hate it because cannot connect to wifi. Only lan port ok. now i’m headache..

]]> By: rgsx http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14980 rgsx Sat, 21 Nov 2009 14:50:53 +0000 http://www.shadowandy.net/?p=3086#comment-14980 I'm using dd-wrt build 13064, just today, cannot connect to wifi but lan port is OK have to 30-30-30 reset the router and re-enter the settings again, this is the 2nd time in 1 week.. I’m using dd-wrt build 13064, just today, cannot connect to wifi but lan port is OK
have to 30-30-30 reset the router and re-enter the settings again, this is the 2nd time in 1 week..

]]> By: kampungwifi http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14973 kampungwifi Thu, 19 Nov 2009 06:03:15 +0000 http://www.shadowandy.net/?p=3086#comment-14973 Hi, does DIR-600 support adjusting transmit power? because i think DIR-300 cannot do that. The setting was different with another ddwrt. I owned ddwrt buffalo whr-hp-g54 and it has transmit power to set in MW. Hi, does DIR-600 support adjusting transmit power?

because i think DIR-300 cannot do that.

The setting was different with another ddwrt.
I owned ddwrt buffalo whr-hp-g54 and it has transmit power to set in MW.

]]> By: rgsx http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14954 rgsx Sun, 15 Nov 2009 06:09:39 +0000 http://www.shadowandy.net/?p=3086#comment-14954 Now using dd-wrt build 13064 -seems stable, better than stock d-link firmware 2.0 -unable to connect 2nd router via WDS or wireless client Now using dd-wrt build 13064
-seems stable, better than stock d-link firmware 2.0
-unable to connect 2nd router via WDS or wireless client

]]> By: shadowandy http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14730 shadowandy Thu, 08 Oct 2009 05:00:55 +0000 http://www.shadowandy.net/?p=3086#comment-14730 Larry, The sets sold in my region are revision B/B1. :D Larry,

The sets sold in my region are revision B/B1. :D

]]> By: Larry http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14729 Larry Thu, 08 Oct 2009 04:36:07 +0000 http://www.shadowandy.net/?p=3086#comment-14729 Only works for people with Revision B/B1. If you got the A/A1 models (The common variant in North America at the moment) there is no support yet. Only works for people with Revision B/B1. If you got the A/A1 models (The common variant in North America at the moment) there is no support yet.

]]> By: shadowandy http://www.shadowandy.net/2009/08/wow-the-d-link-dir-600-supports-dd-wrt.htm/comment-page-1#comment-14587 shadowandy Thu, 17 Sep 2009 11:15:13 +0000 http://www.shadowandy.net/?p=3086#comment-14587 I did a speed test the other time round but didn't blog about it. Let me find the information. I did a speed test the other time round but didn’t blog about it. Let me find the information.

]]>